Delta MultiChoice T17435-CZ-I Manuel D'installation page 9

3
Shower Head and Tub Spout Installation
A.
2
4
B.
2
1
To combine the two showers, connect the top slot (1) of the handshower onto the tab (2) of the
showerhead. Push the handshower into the showerhead until the two parts snap together.
If the showerhead moves when removing the handshower, hand tighten the connection between
the showerhead and the shower arm.
To change spray modes, turn the lever/dial (3) left or right, or push button (3), to the desired setting. Turn
knob or lever (4) to change between showerhead only, showerhead and handshower or handshower only.
FOR SHOWER HEAD INSTALLATION: Connect top
outlet (1) to shower arm (2) with proper fittings. To
1
prevent damage to finish on shower arm, insert wall end
of shower arm into shower flange (3) before screwing
arm into riser connection. Thread shower head (4) onto
3
shower arm. Apply plumber tape to pipe threads on both
ends. Do not overtighten shower head.
7
3
107529 Rev. E
4