LEGRAND C2G31015 Mode D'emploi page 9

HDMI Ultra-Slim HDBaseT + RS232 And IR Over Cat Extender Box Receiver - 4k 60hz
Upgrade Continued
Introduction of the "Firmware Updater":
1: Select C2G31015.
•
RS232:
•
Port: Select the correct COM Port number.
Baud rate: Select the correct baud rate, the correct
baud rate for upgrading is 57600.
Connect: Click the button to connect with the
device.
FW version: Click "Check" button to check the
•
current FW version of the device after
successful connection.
Update File:
•
Click "Browse" to select the FW upgrade bin file
from the local PC.
Update:
•
Click the button to start upgrading FW after the bin
file is uploaded.
Log: Show the log of the operations on the
•
software and returning information of the device.
Clear: Click the button to clear up all the log in the white box.
•
2: The progress bar will show the upgrading process.
•
7
(us) (us)
(us)