Publicité
Les langues disponibles
Les langues disponibles
HDMI Ultra-Slim HDBaseT + RS232 And IR Over Cat Extender Box Receiver - 4k 60hz
Wiring
Warnings:
Before wiring, disconnect the power from all devices.
•
During wiring, connect and disconnect the cables gently.
•
Steps for device wiring:
1. Connect HDMI IN: Connect an HDMI source (such as PC, Blu-ray player,
Apple TV, 4K media player, etc) to the HDMI IN of the transmitter using an
HDMI cable.
2. Connect HDMI OUT: Connect an HDMI display device (such as TV,
projector, LED/LCD display) to the HDMI OUT of the receiver using an
HDMI cable.
3. Connect HDBT OUT: Connect HDBT OUT of the transmitter to HDBT IN of
the receiver using a Cat 5e/6/6a/7 cable.
4. Connect for IR pass-through: Connect the IR emitter to IR OUT of the
transmitter/receiver, and the IR receiver to IR IN of the receiver/
transmitter; secure the IR emitter head over the center of the source
device/display IR window.
5. If the transmitter also supports bidirectional PoC, connect power to either
the transmitter or receiver; if not, connect power to transmitter and
receiver respectively.
6. Power on all attached devices.
When all is set, check if all LED indicators on the transmitter and receiver are
normal to ensure installation is successful. For LED indication, please refer to
Panel Description section.
4
(us)
(us)
(us)
Publicité
