Faber GALILEO SMART BK F830 Manuel D'utilisation page 14

Function
Pause + Restart
Recall Function
Bridge Function
Automatic pan
detection
function
Residual heat
indicator
14
minutes if the person using the hob needs to go away for a short
time.
During the pause:
- No energy is being used in any of the cooking areas.
- All the Timers are stopped.
- The Turbo and Quick Heating functions are deactivated
When the 10 minutes are up, the hob will continue with all the
actions that were set previously.
To activate: press and hold
indicate
To deactivate: press and hold
Press any other button within 10 seconds.
This function is used to recall all the hob function settings in the
event of involuntary shut-down or a sudden power cut.
seconds using
the button to recover the functions set previously. A beep sounds
the previous function settings are recovered automatically.
This function allows 2 cooking areas to be connected, so that they
can be controlled as a single, large cooking area. This means it is
possible to use pans with a larger bottom.
To activate: with the hob turned on, simultaneously press the
required buttons to select the 2 areas to form a bridge, until a
Digit displays to indicate that the function has been activated.
The other Digit is used to set the power level.
Warning: The left cooking areas cannot be connected to the right
ones, and vice versa.
To deactivate: simultaneously press the buttons that have been
used to create the bridge, until the symbol
If a pan is placed on one of the cooking areas, the hob detects
intensity, displaying
The residual heat indicator is a safety feature, indicating that the
surface of the cooking area is still at a temperature of 60° C or
above, which may cause burns if touched by a naked hand.
The Digit for the corresponding cooking area displays
for at least 1 second. All the Digits
, the
.
disappears.
.