INVENTOR PM-WUI-16L Manuel D'utilisateur page 18

8. CONTROL PANEL • FUNCTIONS
POWER
By pressing the "POWER" button the dehumidifier turns on or off. The "Power" button and Display
will turn on.
• When the set humidity is reached, the Energy Savings function is automatically
activated during which the digital control display of the device may show increased
humidity levels. This is because the fan is not operating. After the predetermined
timeframe and if the humidity levels have increased, the device will resume
dehumidification.
• In the event of a power failure the unit has an Auto Restart function. Once power
is restored, the appliance will automatically restart at the preselected settings prior
to the power failure.
Wi-Fi
Upon installation (initial) of the application Inventor Control, please make sure that the
dehumidifier is turned off. Press on the POWER button for 3 seconds continuously, until the
indication "AP" appears on the main display. If pairing between the router and the unit is successful
after a period of 8 minutes, the unit will exit Wi-Fi connection mode and the unit will enter all
previously set functions. If there is a failure in pairing within the 8minute time-frame, the unit will
automatically exit Wi-Fi connection mode.
NOTE: When the unit is remotely accessed, via the Wi-Fi APP, the
LED indicator above the Power button will be active.
TIMER
Press the "TIMER" button to initiate the auto START or auto STOP function in combination with
the PLUS (+) and MINUS (-) buttons. The "TIMER" indicator and the display will turn on.
18
EN