Publicité
Les langues disponibles
Les langues disponibles
GB
3 Operating
3.7
Setting the
convenience
functions
Setting the
timer switch
Setting the timer
(TIMER)
12
Your MEDISANA intensive humidifier has 4 convenience functions: An integrated
timer switch, a timer, a clock display and an alarm function.
The integrated timer switch allows you to automatically switch on your humi-
difier at a certain time.
The Medibreeze PLUS can be switched on and off at certain times using the
timer function. When it is in this operating mode, the device alternately runs
through the operating and idle periods at the selected time intervals.
Set the current time to use the Medibreeze PLUS as a clock and an alarm clock.
A setting procedure is used to set the timer switch, the timer, the clock and the
alarm. If no button is pressed for 15 seconds during the setting procedure, the
procedure is exited.
• Hold down the MODE button
start the setting procedure. "ON" or "OFF" flashes in the display
• If you wish to activate the timer switch, press the SET button
"ON" flashes. Confirm by pressing the ENTER button
• The hours start to flash. You can now select an activation time at which the device
automatically switches on (e.g. 20:30 hrs.). Press the SET button
until the required number of hours (20 hours in the example) is displayed. You
can hold down the SET button
ty. Confirm by pressing the ENTER button
• The minutes start to flash. Press the SET button
number of minutes (30 minutes in the example) is displayed. Confirm by pressing
the ENTER button
. The activation time is stored.
• If you do not wish to activate the timer switch, press the SET button
at the start of the procedure until "OFF" flashes. Then press the ENTER button
three times to skip timer switch activation.
• The time interval for operating the humidifier can now be set (e.g. 2 hours
and 30 minutes). To do this, press the SET button
required hour value (2 hours in the example) is displayed. Confirm the setting
by pressing the ENTER button
• Press the SET button
tes in the example) is displayed and confirm your setting again by pressing the
ENTER button
. "TIMER" and "OFF" appear in the display
hours start to flash.
• Now set the idle time for the humidifier (e.g. 4 hours and 15 minutes). To do
this, press the SET button
in the example) is displayed. Confirm the setting by pressing the ENTER button
. The minutes start to flash.
• Press the SET button
minutes in the example) is displayed and confirm your setting by pressing the
ENTER button
. The timer setting procedure is complete. You can now set
the time.
for 3 seconds with the device switched off to
to set the values using the fast-forward facili-
.
. The minutes start to flash.
repeatedly until the required minute value (30 minu-
repeatedly until the required hour value (4 hours
again repeatedly until the required minute value (15
.
repeatedly until
.
repeatedly
repeatedly until the required
repeatedly
repeatedly until the
and the
Publicité
