PROUSER IBC15000B Mode D'emploi page 13

WARNING! Do not open or disassemble the device. Attempting to service the unit
yourself may cause the risk of electrical shock or fire. Please follow the safety
instructions when working on the device.
In a few cases , the charging process will finish very quickly, but the battery is not fully charged or
does not deliver the desired voltage or power. The reason for this case could be that the battery is
broken and needs to be replaced. If the device doesn't work at all, an internal fuse might be blown.
This happens always for a reason. Do not try to replace internal fuses yourself. The device has to
be checked by the manufacturer or by an authorized service.
ERROR DIAGNOSTICS
Error conditions are indicated in the
Error
Standard Charging
Mode
Recovery Mode
Battery capacity is too high for the selected mode. Verify the battery capacity and
Battery voltage is too high or too low for the selected mode. Verify the battery voltage
Flashing
TROUBLESHOOTING
LCD display.
Reason/Solution
The battery is not accepting a charge. Change charge mode to
The battery cannot be recovered.
charge mode.
and charge mode.
Reverse polarity. Reverse the battery connections.
Recovery Mode.
13