Publicité
WARNING
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Lower Plate
Plaque
inférieure
Base inferior
Two Screws
Deux vis
Dos tornillos
Motor Drive
Shaft
Arbre du moteur
Eje del motor
Belt
Courroie
Correa
Electrical Shock or Personal Injury Hazard
Removing and Installing Lower Plate
Latches
Loquets
Lenguetas
Replacing Belt
Agitator
Agitateur
Agitador
➢ ➢ Before servicing any parts,
disconnect vacuum cleaner from
electrical outlet.
➢ ➢ Place paper under nozzle anytime
lower plate is removed to protect
floor.
➢ ➢ Place handle in upright position and
turn vacuum cleaner over to expose
lower plate.
➢ ➢ Release lower plate by removing two
(2) screws.
➢ ➢ Remove lower plate and remove any
residue that may exist in belt area.
➢ ➢ Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle housing.
➢ ➢ Press lower plate into place and
reinstall two (2) screws.
➢ ➢ Remove lower plate.
➢ ➢ Remove agitator by carefully lifting
out.
- 26 -
Publicité
