Publicité
Les langues disponibles
Les langues disponibles
LED FUNCTION OF CHARGER
See Figures 1 and 6, pages 7 - 9.
There are two sets of green and red LEDs. The green and red LEDs closest to the 40V battery port will indicate the status of a 40V
battery pack and the LEDs closest to the 18V battery port will indicate the status of an 18V battery pack.
MODE
BATTERY PACK
Without battery
POWER
pack
Hot battery pack
EVALUATE
Cold battery pack
Deeply discharged
ERROR
Pack inserted
• Try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED Error status repeats a
second time, try charging a different battery.
• If a different battery charges normally, dispose of the pack that received the Error (see your battery pack manual for instructions).
• If a different battery also indicates Error, the charger should be replaced.
CHARGING
Pack inserted
FULLY
Pack inserted
CHARGED
STANDBY
Pack inserted
MODE
NOTE: MAINTENANCE INFORMATION BEGINS ON PAGE 6 AFTER FRENCH
AND SPANISH LANGUAGE SECTIONS. ILLUSTRATIONS START ON PAGE 7.
OPERATION
GREEN LED
RED LED
OFF
ON
OFF
Flashing
OFF
Fading
ON
Flashing
OFF
ON
OFF
Fading
5 — English
ACTION
Ready to charge battery pack.
When battery pack reaches cooled temperature, char-
ger begins charge mode.
When battery pack reaches warmed temperature,
charger begins charge mode.
Charger pre-charges battery until normal voltage is
reached, then begins charge mode.
Battery pack or charger error.
Charging
Charging complete
Battery pack is fully charged and charger is in standby
mode.
Publicité
