Electrolux EK244S Notice D'utilisation page 70

70 www.electrolux.com
Problem
The appliance is noisy.
Audible or visual alarm is
on.
A rectangular symbol is
shown instead of numbers
on the Temperature Dis‐
play.
The lamp does not work.
The compressor operates
continually.
Possible cause
The mains plug is not con‐
nected to the mains socket
correctly.
There is no voltage in the
mains socket.
The appliance is not sup‐
ported properly.
The cabinet has been re‐
cently switched on or the
temperature is still too
high.
The temperature in the ap‐
pliance is too high.
The door is left open.
The temperature in the ap‐
pliance is too high.
Temperature sensor prob‐
lem.
The lamp is in stand-by.
The lamp is defective.
Temperature is set incor‐
rectly.
Many food products to be
frozen were put in at the
same time.
The room temperature is
too high.
Food products placed in
the appliance were too
warm.
The FastFreeze function is
switched on.
Solution
Connect the mains plug to
the mains socket correctly.
Connect a different electri‐
cal appliance to the mains
socket. Contact a qualified
electrician.
Check if the appliance
stands stable.
Refer to "Door Open
Alarm"or "High Tempera‐
ture Alarm".
Refer to "Door Open
Alarm"or "High Tempera‐
ture Alarm".
Close the door.
Contact a qualified electri‐
cian or contact the nearest
Authorized Service Centre.
Contact the nearest Au‐
thorized Service Centre
(the cooling system will
continue to keep food
products cold, but temper‐
ature adjustment will not
be possible).
Close and open the door.
Contact the nearest Au‐
thorized Service Centre.
Refer to "Operation" chap‐
ter.
Wait some hours and then
check the temperature
again.
Refer to climate class chart
on the rating plate.
Allow food products to cool
to room temperature be‐
fore storing.
Refer to "FastFreeze func‐
tion".