Publicité
Les langues disponibles
Les langues disponibles
Adding/Subtracting 2 Areas
E
You can measure the area of a wall, floor,
or object and then add it to, or subtract it
from, the area of another wall, floor, or object
(Figure
).
M
Point the tool's laser (Figure
1.
a wall or object, and not toward anyone's
eyes.
Press
2.
on and display the red laser dot.
Make sure the tool position setting
3.
(Figure
C 4
measurement.
Select
as the measurement type.
4.
• Press
(Figure
E 2
• Press
• Press
Type Menu (Figure
• Press the arrow buttons to select
• Press
Press
to add, or
5.
areas of two walls, floors, or objects.
Measure the width of the first wall, floor, or
6.
object (Figure
• Position the tool at one end of the wall,
floor, or object and point the laser dot
across the width. (Figure
where to position the tool if you are
measuring from the bottom of the tool.)
• Press
measurement at the top of the screen.
16
A 1
(Figure
) to turn the tool
A 3
) is correct for taking the
to display the Main Menu
).
to select
.
to display the Measurement
).
E 3
.
to subtract, the
).
D 1
M 1
to display the width
Measure the length of the first wall, floor,
7.
or object (Figure
• Position the tool at one end of the wall,
floor, or object and point the laser dot
across the length. (Figure
where to position the tool if you are
) toward
measuring from the bottom of the tool.)
• Press
measurement on the second line of the
screen.
Follow the same steps to measure the
8.
width and length of the second wall, floor,
or object.
View the Area measurement at the bottom
9.
of the screen (Figure
Measuring Volume
You can measure the volume of a room or
object (Figure
Point the tool's laser (Figure
1.
a wall or object, and not toward anyone's
.
eyes.
Press
2.
on.
Make sure the tool position setting
3.
(Figure
measurement.
Select
4.
• Press
shows
(Figure
• Press
• Press
Type Menu (Figure
• Press the arrow buttons to select
• Press
).
M 2
M 2
to display the length
).
M 3
).
N
(Figure
) to turn the tool
A 3
) is correct for taking the
C 4
as the measurement type.
to display the Main Menu
).
E 2
to select
.
to display the Measurement
).
E 3
.
shows
) toward
A 1
.
Publicité
