Velleman DCM140 Mode D'emploi page 11

9.8 CAPACITANCE
range
10 nF
100 nF
1 µF
10 µF
100 µF
1 mF
10 mF
100 mF
Overload protection: 250 V DC or AC rms
10. Operation
10.1 AC VOLTAGE MEASUREMENT
Do not measure circuits that may contain voltages > 600 V AC or DC
Use extreme caution when measuring voltages higher than 60 VDC
or 30 VAC rms.
Always place your fingers behind the protective edges of the test
probes while measuring!
1. Connect the black test lead to the "COM" jack and the red test lead to
the input jack.
2. Set the selection button to the desired "
3. Connect the test leads across the source under measurement.
4. Read the voltage value on the LCD display.
10.2 DC VOLTAGE MEASUREMENT
Do not measure circuits that may contain voltages > 600 V AC or DC
Use extreme caution when measuring voltages higher than 60 VDC
or 30 VAC rms.
Always place your fingers behind the protective edges of the test
probes while measuring!
V. 01 – 26/02/2019
Do not conduct frequency measurements on live circuits
resolution
0.01 nF
0.001 µF
0.01 µF
DCM140
0.1 nF
0.1 µF
1 µF
10 µF
100 µF
11
accuracy
± (4.0 % + 25)
± (4.0 % + 15)
± (5.0 % + 25)
" position.
©Velleman nv