Publicité
Les langues disponibles
Les langues disponibles
14.1 Setting the SLEEP
function
1. With the appliance in COOL
mode, start the SLEEP
function with button "b"
(SLEEP).
2. The fan runs at the lowest
speed.
3. 0 – 2 hours: Increase by 1°C
per hour.
4. 2 hours later: Temperature is
kept constant.
NOTE
The function is only available in
cooling mode.
Sleep function does not include
noise reduction.
Using the SWING function
Setting of the air flow for a more
comfortable and better air
circulation.
1. Activate the SWING function with
button "a".
2. The air flow direction (louvres)
moves from left to right.
3. Fix the air flow direction
(louvres) in the respective
position by pressing button "a"
again.
14.2 MODE description
Select the operating mode between
FAN, DEHUM, COOL and AUTO with
button "d" (MODE).
When changing from COOL to
DEHUM or HEAT mode (and vice
versa), allow an ON/OFF interval of
3 minutes.
FAN – ventilation mode
Set the fan speed with button
•
"h" (SPEED).
DEHUM
The appliance automatically
•
lowers the current room
temperature by 2°C.
The fan speed is automatically
•
set to "low" (LOW).
COOL – cooling mode
Set the temperature 16°C and
•
31°C with buttons "e/g"
(DOWN/UP).
Set the fan speed with button
•
"h" (SPEED).
HEATING Operation
Press the MODE button till the
•
HEAT Icons appers
Press the DOWN or UP button to
•
select a desired room
temperature ( 16-31 Grad )
The selected temperature
•
appears on the display
Press the WIND button to select
•
wind speed
Setting the fan speeds
Set the fan speed to low (LOW),
medium (MEDIUM) or high (HIGH)
with button "h" (SPEED).
Water tank alarm function
The water tray inside the mobile air
conditioner has a water level safety
switch which monitors the water
level. When the water level reaches
an expected height, the indicator
light "j" (FULL) comes on.
14.3 Connecting water drain
hose
Note that the water drain hose
connected to the mobile air
conditioner must not run higher than
the position of the hose connection
on the mobile air conditioner at any
point, as otherwise condensation
may flow back into the mobile air
EN
Page | 31
Publicité
