Garland GEISER 601 QG Manuel D'instructions page 29

Mounting the spark plug:
1. Replace the spark plug in place.
2. With your hand, screw the spark plug several
times. It is important to do this, so as to ensure
that the spark plug is screwed on correctly. If
you start screwing the spark plug with the key, the
possibilities of introducing the spark plug in a
wrong position, will be increased.
3. Once you are sure that the spark plug has entered
correctly, insert the key and screw the spark plug
further. The tightness should be between 12 and
15 Nm.
7.5. CLEANING THE PETROL DEPOSIT FILTER
With use and time, dirt will accumulate in the inside
of the deposit and this dirt could block the admission
of the petrol deposit or that of the carburettor. To
minimise this risk, the machine has a filter in the entry
of the petrol deposit.
Cleaning the petrol deposit filter:
1. Remove the petrol deposit cap.
2. Remove the filter.
3. Clean the filter with petrol.
4. Dry the filter.
5. Replace the filter.
29/100
English