Campbell Hausfeld PW182501 Manuel D'instructions page 5

Assembly and Preoperation
Always make sure that
the garden hose is turned on before turning on
the pressure washer. Running the pressure washer without water will
damage the pumps seals.
Do not disassemble the lance or gun on this
pressure washer. Replacement parts are not available for the gun or
lance.
PW182501 & PW183501
1. Attach storage hooks.(see Figure 3)
2. Slide handle (1) onto unit, attach with 4 phillips screws. (see
Figure 4)
3. Attach high pressure hose to high pressure outlet (see Figure
8)
4. Attach high pressure hose to gun (see Figure 5).
5. Attach lance to gun, twist and lock. Attach nozzle or
detergent bottle to lance by pressing the Easy Connect
button and inserting into Quick Connect on lance. (see
Figures 6 & 7)
6. Attach garden hose to unit (see Figure 9).
7. Press Easy Connect button while inserting Quick Connect
fitting. (see Figure 5, 7 & 8)
Figure 3 - Attach storage hooks
(PW182501 only)
Figure 6 - Attach lance to gun
Water inlet
Figure 9 - Attach garden hose to unit
1
2
3
4
Figure 4 -Attach phillips screws
(PW182501 only)
Figure 7- Attach nozzle to lance or detergent
bottle
5
Models: PW182501, PW183501
Figure 5 - Attach high pressure hose to gun
Figure 8 - Attach high pressure hose
www.campbellhausfeld.com