GE APPLIANCES PFD87 Guide De L'utilisateur Et Instructions D'installation page 7

Getting started
D Drying Sensor cycles automatically determine fabric dryness.
Cycles
Timed cycles run for the selected time.
MIXED LOADS For loads consisting of cottons and poly-blends.
COTTONS For cottons and most linens. NOTE: ENERGY STAR
with default settings (Temp setting on High, Level setting on Dry, and ecoDry default on).
TOWELS For most towels and linens.
(on some models)
BULKY For large coats, bed spreads, mattress covers, sleeping bags, and similar large/bulky items
Bedding
such as blankets, comforters, jackets, and small rugs.
SANITIZE This option reduces certain types of bacteria including: Staphylococcus aureus, Pseudomonas
(on some models)
aeruginosa and Klebsiella pneumoniae. The anti-bacterial process occurs when high heat is
used during a portion of the drying cycle; cool down also will be longer to protect you from a
hot garment.
NOTE: Do not use this cycle on delicate fabrics.
WASHER When selected (and if connected to a compatible washer through WiFi communication)
LINK (on the dryer receives load information from the washer to automatically make cycle, dryness,
some models) temperature and time recommendations to optimize drying.
ACTIVE Clothing worn for active sports exercise and some casual wear. Fabrics include new
WEAR technology finishes and stretch fibers such as Spandex. Also for clothing labeled Easy Care or
(on some models)
Perma Press: For wrinkle-free and permanent press items.
QUICK DRY For small loads that are needed in a hurry, such as sport or school uniforms. Can also be
used if the previous cycle left some items damp, such as collars or waistbands. NOTE: On
some models, the time remaining in the cycle will show counting down in the display.
DELICATES For delicate items, special-care fabrics and knits.
PERM PRESS For wrinkle-free, permanent press and special sports items that need extra drying care.
(on some models)
AIR FLUFF Provides 10 minutes of tumbling time with no heat. NOTE: On models with AIR FLUFF cycle,
(on some models)
select TIMED DRY and set Temp to No Heat.
DEWRINKLE For removing wrinkles from items that are dry or slightly damp. This cycle is not recommended
(on some models)
for delicate fabrics.
STEAM For use with larger loads than STEAM Refresh. Ideal for loads left in the dryer for an
Dewrinkle extended time.
(on some models)
STEAM Dewrinkle is recommended for larger loads (9-13 garments).
NOTE: Steam cycles are not intended for use with towels.
Important - The temperature setting must be set to High and water must be turned on
before running the STEAM Dewrinkle cycle.
STEAM For slightly wrinkled dry garments. Significantly reduces wrinkles. After the STEAM Refresh
Refresh cycle, the unit will beep (if Sound is selected) and display "00."
(on some models)
STEAM Refresh is recommended for small loads (3-5 garments).
NOTE: Steam cycles are not intended for use with towels.
NOTE: A single extremely light fabric item may need to have an additional item included in the
STEAM Refresh cycle to achieve optimum results.
Important - The temperature setting must be set to High and water must be turned on
before running the STEAM Refresh cycle.
STEAM This cycle will sanitize and remove set-in wrinkles from standard sized loads which are
SANITIZE damp from washing and/or rinsing. This cycle reduces certain types of bacteria including:
(on some models)
Staphylococcus aureus, Pseudomonas aeruginosa and Klebsiella pneumoniae. This anti-
bacterial process occurs when high heat is used during a portion of the drying cycle.
NOTE: Do not use this cycle on delicate fabrics.
Important - The temperature is set to HIGH and cannot be changed. Water must be
turned on for the Steam Sanitize cycle to function properly.
49-3000386 Rev 0
®
models are tested on COTTONS cycle
7