Faber FCH SLIM 94 Manuel D'utilisation page 9

7. POWER LIMITATION
When connecting to the domestic power
supply for the first time, the installer must
set the power of the cooking areas based
on the actual capacity of the domestic
power supply.
If this is not necessary, the hob can be
turned on directly using
follow the operations below to access the
menu.
• Connect the hob to the domestic
mains power (this operation must be
performed each time the menu is ac-
cessed).
• All the digits light up for a few seconds.
• As soon as the digits go out again,
press and hold
seconds until the left swipe keyboards
light up.
8. FUNCTIONS
Lock
Child lock
, otherwise,
and
It is possible to lock the hob functions during use, e.g. to clean the hob.
To enable: press .
To disable: press .
This function prevents accidental use of the appliance
To enable: simultaneously press
All the digits indicate .
The operations described must be completed within 10 seconds.
To disable: simultaneously press
All the digits that indicate
The operations described must be completed within 10 seconds.
• Press and hold both swipe keyboards
on the left for 4 seconds until the 3
control digits indicate "CF6".
• Press
• Press the last keyboard on the left to
select the correct setting.
See the following table for the specifica-
tions:
Value on swipe
keyboard
0
1
2
3
4
5
6
Once the correct value has been
for 4
entered, confirm by pressing and holding
and
and , release and press
and , release and press
disappear.
until "PHA" appears.
Notes
KW
Standard initial setting
7.4
6
5
4
3.5
3
2.5
.
again.
again.
9