Publicité
Les langues disponibles
Les langues disponibles
P
RESSING THE
YOUR DISPLAY VIDEO
,
CHOICE
,
ONLY
FINALLY MOVING TO BOTH THE BUILT
IEEE 1394 Port
The 4-pin 1394 port allows you to connect digital devices that are compliant with IEEE 1394 standard.
The IEEE 1394 standard is easy to use, connect, and disconnect. This port can allow up to 400 Mbps
transfer rate. A third-party application is required to operate your digital device with the 1394 port
T
1394
HE
INTERFACE WITH DEVICES WHICH USE A SIX
ADAPTER
In order to connect a 1394 device,
follow these steps:
1
Align the connector with the port
opening.
2
Push the connector into the port
until it is seated.
(Figure 34)
[F
] + [F10]
N
KEYS ALLOWS YOU TO CHANGE YOUR SELECTION OF WHERE TO SEND
. E
ACH TIME YOU PRESS THE KEY COMBINATION
-
STARTING WITH THE BUILT
PORT USED IN THIS SYSTEM USES A FOUR
.
83 - Device Ports
,
IN DISPLAY PANEL ONLY
MOVING TO THE EXTERNAL MONITOR
-
IN DISPLAY PANEL AND AN EXTERNAL MONITOR
-
PIN CONFIGURATION
-
PIN CONFIGURATION
Figure 34. Connecting an IEEE 1394 Device
,
YOU WILL STEP TO THE NEXT
.
. I
F YOU INTEND TO
,
YOU WILL NEED TO PURCHASE AN
.
Publicité
