Philips MG3711 Mode D'emploi page 11

Using the appliance
Detaching and attaching cutting elements
2
1
2 Insert the small plug into the appliance and put
the supply unit in the wall socket.
3 After charging, remove the supply unit from the
wall outlet and pull the small plug out of the
appliance.
Note: Switch off and clean the appliance after each
use.
1 To detach a cutting element, push upwards
against the teeth of the cutting element and
take it off the handle.
2 To attach a cutting element, insert the lug of the
cutting element into the guiding slot at the front
and push the back of the cutting element onto
the appliance ('click').
Detaching the nose trimmer
1 Place your finger on the arrow at the back of
the attachment and push it off the handle in the
direction of the arrow.
11
English