Publicité
Les langues disponibles
Les langues disponibles
installation and finishing
EN
5. Complete hard-wiring (see "electrical information" section).
note:
It is recommended to complete finishing of the wall before fully securing the appliance (Fig. 3-6).
6. Carefully lift the appliance into the rough-in framing (Fig. 3-7).
7. After the appliance is inserted into the rough-in frame to position, secure the appliance to the rough-in framing
by installing 4 screws (supplied) through one of the three holes of the mounting tabs from the inside of the ap-
pliance (Fig. 3-8).
A x 4
12
W415-3155 / B / 07.06.23
Bend tabs as
necessary.
Fig. 3-6
Fig. 3-7
Framing
hidden for
clarity.
Fig. 3-8
Publicité
