Publicité
Les langues disponibles
Les langues disponibles
6. Standby
The Reduced Consumption Mode works without the loss the reference position. The standby mode is ac-
tivated automatically after 10 minutes of no use. It can also be activated by pressing the [SET] key until
extinction of display.
The instrument awakes automatically when movement is detected on the thimble, by pressure on a button,
or when requesting Data.
7. Full Switch OFF
In order to fully switch off the instrument (minimum power consumption), press the [SET] button until the
message «OFF» appears. In this state no data is maintained and therefore the Reference position is lost. The
--SET-- message will be displayed again during the next use (see "Switching ON").
12
Publicité
