tomado TM-6661 Mode D'emploi page 27

Self-cleaning function
• Use the self-cleaning function at least once a month
to prevent scale from forming in the iron.
• Remove the plug from the mains power socket.
• Allow the appliance to cool down completely.
• Fill the water reservoir, see 'Filling the water
reservoir'.
• Set the temperature control dial to 'MAX'.
• Stand the iron on its heel on a level, stable, heat-
resistant surface.
• Insert the plug into the mains power socket. The
temperature indicator will be lit. The temperature
indicator light will go out once the set temperature
has been reached.
• Remove the plug from the mains power socket.
• Hold the appliance horizontally above a sink or
(wash)basin.
• Keep the Self-clean button depressed. The mix of
water and steam will remove any dirt and scale.
• Carefully move the iron to and fro.
• Wait until all the water in the reservoir has been
used.
• Repeat this process until only clean water comes out
of the iron.
• Use a damp cloth to clean the iron's housing and
soleplate.
• Dry them with a dry cloth.
STORAGE
Turn the steam dial to '0'. Empty the water reservoir.
Stand the iron on its heel in a dry place.
TECHNICAL DATA
TM-6661
Power: 2300 W
Voltage: 230 V - 50 Hz
Instruction manual TM-6661
27