tomado TM-6661 Mode D'emploi page 26

• Iron your laundry.
• Press the spray button to moisten the fabric while
ironing.
• Stand the iron on its heel after use.
• Turn the temperature control dial to '0'.
• Remove the plug from the mains power socket.
• Allow the appliance to cool down completely.
• Clean the appliance, see 'Cleaning and
Maintenance'.
TIPS FOR uSE
• Always check the ironing instructions in your clothes.
• See the table below for the correct temperature
setting.
• NYLON
•• SILK
•• WOOL
••• COTTON
MAX LINEN
• Always start by ironing fabrics that need to be
ironed at a low temperature. Then iron fabrics that
can be ironed at a higher temperature.
• If you set the temperature control dial to a lower
setting, wait until the temperature indication light
26
Synthetic fabrics such as nylon
and polyester
Silk
Wool
Cotton
Linen
Instruction manual
turns back on. Once the set temperature has
been reached, the light will go out and you can
continue ironing. This ensures that the appliance's
temperature is not too high.
• For fabrics made from mixed fibres, adjust the iron's
temperature setting for the most delicate fibre.
• If you have not used the appliance for a number
of weeks, first carry out the procedure described in
'Before using for the first time'.
• If you are using starch, clean the soleplate every so
often with a soft, damp cloth to prevent scale build-
up.
CLEANING AND MAINTENANCE
WARNING:
Before cleaning the appliance, always switch it off,
unplug it from the electricity supply and allow it to cool
down completely.
• Do not clean the appliance with an aggressive or
abrasive cleaner, or with a sharp object such as a
hard brush or knife.
• Empty the water reservoir.
• Use a damp cloth to clean the iron's housing and
soleplate.
• Dry them with a dry cloth.
• If required, clean the soleplate with cleaning
vinegar.
TM-6661