Electric oven
Using the hood control feature
NOTE
This product features a Bluetooth device that you can use to connect the range to
Dacor hood control models. Through the Bluetooth connection, you can use the
hood control function on the SmartThings app.
For the matching hood control-enabled range and hoods, refer to the below table.
Dual Fuel range
DOP36*86D**
Model
To connect to a hood control model and a hood:
1.
Download and run the SmartThings app on your smartphone. Then, complete
the iQ Control procedure to connect to the range. See page 40.
2.
Follow the hood control model's Bluetooth instructions and activate the
Bluetooth connection.
3.
Press the Bluetooth icon
LED blinks.
42 English
DOP36T86DLS_DA_DG68-01105G-00_EN+MES+CFR.indb 42
DOP36T86DLS_DA_DG68-01105G-00_EN+MES+CFR.indb 42
Matching Hoods
DHD30M967W*
DHD36M987W*
DHD48M987W*
DHD36M967I*
DHD48M967I*
DHD36M867W*
DHD30M867W*
on the hood's control panel. The Bluetooth icon
4.
Press the Settings button on the range
display screen. Press <, > to select Hood
Connection. Tap OK to connect to the
hood.
5.
When Bluetooth pairing is finished,
the Bluetooth icon LED stops blinking
and glows steadily. Press the Settings
button to exit.
Follow the instructions in the user
6.
manual of the hood control model and
the App guide to use the hood control.
Bluetooth on/off
1.
Press the Bluetooth icon
on the hood's control panel.
NOTE
•
The Bluetooth icon LED on the hood is on when Bluetooth is enabled.
The Bluetooth icon LED on the hood is off when Bluetooth is not enabled.
•
If the iQ Control connection is not successful, you cannot use the SmartThings
app to monitor and control the hood.
•
Without a iQ Control connection to the range, you can use a Bluetooth
connection to pair the range with the hood and sync them. To do this, follow
the Bluetooth connection steps on page 42.
•
Bluetooth will not work properly if the Bluetooth connection is unstable.
•
See the SmartThings app manual for detailed information.
2023-02-28 오전 9:51:30
2023-02-28 오전 9:51:30