Haier HSL04WNA Guide De L'utilisateur page 10

English
English
9. Align the pin of the top hinge with top hole on the left side of the door and
push into place. Replace the screws in the upper hinge bracket but do not
tighten all the way. (see fig. # 2)
10. Make sure the door closes easily but forms a tight seal. Adjust the door as
needed. Once you are satisfied with the door alignment, completely tighten
the upper door hinge screws.
11. Replace the hinge cover, insert the screw and tighten completely. (see fig. #
2)
12. If the door does not close properly, refer to the section titled "Door
Alignment".
Fig. 3
9
screw hole plug
screw holes plug
door pin
door pin
lower hinge bracket
lower hinge bracket