Publicité
Les langues disponibles
Les langues disponibles
Operating the extractor hood
The most effective method of removing
vapours produced during cooking is to:
Switch the ventilator ON
as soon as you begin cooking.
Switch the ventilator OFF
a few minutes after you have finished
cooking.
The fans in this appliance can be swit-
ched to the desired setting by hand
(manual mode) or can be controlled fully
automatically with the automatic function
according to your
requirements (automatic mode).
Switching on manual mode:
+
L
Press the
or
button.
The fan starts at Setting
Appliances without automatic mode:
Fan – off –
Fan settings
– lower –
Light
on / off
Fan
Display:
on / off
Fan settings / Intensive
setting
Saturation –
grease filter
Saturation –
activated carbon filter
}
.
Fan – on –
Fan settings
– higher –
Intermittent
ventilation
#
ã
r
Switching on the fan settings/intensive
setting:
1. To increase the fan settings or switch on
the intensive setting
button.
The intensive setting operates at
maximum power which should be
used only briefly.
If the intensive setting is not switched
off manually, the fan automatically
switches back to Setting
10 minutes.
2. To switch off the intensive setting
switch back to fan settings
switch off the extractor hood
completely, press the
Appliances with automatic mode:
(Ultraschall-Sensor)
Fan – off –
Fan settings – lower –
Fan – on –
Fan settings – higher –
Light
Display:
on / off
Fan settings / Intensive
setting
Fan
Saturation –
on / off
grease filter
Saturation –
activated carbon filter
Switching over to automatic mode:
To switch from manual mode to
automatic mode at any time, press the
button.
+
, press the
ç
}
after
ç
or
and
~
}
|
–
–
–
button.
Automatic mode
/ Manual mode
Intermittent
ventilation
#
ã
r
Ü
21
Publicité
