Publicité
Les langues disponibles
Les langues disponibles
Connect
1
Garden Hose to
Pump
Thread the garden hose
to the pump inlet.
Connect Spray
4
Wand to Spray
Gun
Thread the spray
wand into the end
of the spray gun.
Turn Water
6
Faucet
Completely On
Do not run the
unit without water
supply connected
and turned on. Use
Cold Water Only.
WARNING: This Guide is not a substitute for reading the operator's manual.
User must read and understand operator's manual before using this product.
Connect High
2
Pressure Hose
to Pump
Connect the high
pressure hose to
the pump outlet.
(if equipped) QC
5
Nozzles
Connect QC
Nozzles to Spray Wand
Pull quick connect
coupler back and insert
nozzle. Release quick
connect coupler and
twist nozzle to make sure
it is secure in coupler.
Release Air
7
from System
Release all
air from pump and
high pressure hose
by depressing trigger
until a steady stream
of water is present.
Approximately
30 seconds.
30 S
9 - ENG
Connect High
3
Pressure Hose
to Spray Gun
Thread the other end
of the high pressure
hose to the spray gun.
(if equipped)
5 n 1 Nozzle
Select a spray pattern
Rotate the spray selector
to the desired setting
Start engine. See
8
Engine Owner's
Manual for
correct
procedure.
Publicité
