Samsung SR2M70 Serie Mode D'emploi page 15

Installing the Virtual guard
Infrared ray from the Virtual guard will restrict POWERbot from approaching
certain area.
✻ ✻ (Included with SR2✴M707✴✴✴ series only. For SR2✴M704✴✴✴ / SR2✴M705✴✴✴ /
SR2✴M706✴✴✴ series, additional purchase is required.)
The distance of virtual wall is 2.5 m at minimum and may differ
depending on surroundings and movement status of POWERbot.
1
Press the Power button
to turn it on
Power lamp (Red) will blink.
2
Install the Virtual guard
where you want to restrict
POWERbot's entrance
Make sure that distance sensor is facing
at the desired direction you want to
create a invisible barrier (which will
restrict POWERbot's approach).
ENGLISH-15
Virtual guard