Télécharger Imprimer la page

PULOX PO-230 Mode D'emploi page 24

Publicité

Les langues disponibles
  • FR

Les langues disponibles

least. When there is obvious damage, stop using the device.
 Necessary maintenance must be performed by qualified service
engineers ONLY. Users are not permitted to maintain it by themselves.
 The oximeter cannot be used together with devices not specified in
User's Manual. Only the accessory that appointed or recommendatory
by manufacture can be used with this device.
 This product is calibrated before leaving factory.
1.2 Warning
Explosive hazard—DO NOT use the oximeter in environment with
inflammable gas such as some ignitable anesthetic agents.
DO NOT use the oximeter while the testee measured by MRI and CT.
The person who is allergic to rubber can not use this device.
The disposal of scrap instrument and its accessories and packings
(including battery, plastic bags, foams and paper boxes) should follow
the local laws and regulations.
Please check the packing before use to make sure the device and
accessories are totally in accordance with the packing list, or else the
device may have the possibility of working abnormally.
Please don't measure this device with functional tester for the device's
related information.
1.3 Attention
 Keep the oximeter away from dust, vibration, corrosive substances,
explosive materials, high temperature and moisture.
 If the oximeter gets wet, please stop operating it.
 When it is carried from cold environment to warm or humid
environment, please do not use it immediately.
 DO NOT operate keys on front panel with sharp materials.
EN

Publicité

loading