Caterlite GG769 Mode D'emploi page 4

UK
Operation
1. Connect the appliance to the mains power supply.
2. Place suitable cookware on to the centre of the glass plate.
3. Press the On/Off button to turn the appliance On. The On/Off indicator will illuminate.
The Induction Hob will work by either running at a Power level or to a Temperature. When running at
a fixed temperature, the power to the pan will reduce as the pan heats up.
4. Press the Function button to cycle between the Power and Temperature functions.
5. Press the Increase or Decrease button to change the level of each function.
Function
Power (Left Hob)
Power (Right Hob)
Temperature
Timer
NOTE - If unsuitable cookware or no cookware is present the induction cooker will beep
for 60 seconds before switching off
To use the timer press the timer button. The LCD display will switch to Timer and the
Timer indicator will illuminate and flash. Press the Increase or Decrease button to change
the timer. The Timer indicator will flash while the timer is in use. When the timer finishes
the hob will switch off.
To lock the control panel press the Lock button. To unlock press and hold the lock button
This appliance has an overheat protection function. If the pan becomes too hot the
appliance will switch off, a buzzer will sound and the display will show "E02". Should this
happen, wait for 10 minutes to allow the appliance to cool before restarting, as above.
To use the timer press the timer button. The LCD display will switch to Timer and the
Timer indicator will illuminate and flash. Press the Increase or Decrease button to change
the timer. The Timer indicator will flash while the timer is in use. When the timer finishes
the hob will switch off.
To lock the control panel press the Lock button. To unlock press and hold the lock button
This appliance has an overheat protection function. If the pan becomes too hot the
appliance will switch off, a buzzer will sound and the display will show "E02". Should this
happen, wait for 10 minutes to allow the appliance to cool before restarting, as above.
Cleaning, Care & Maintenance
Disconnect from the power supply and allow the appliance to cool before cleaning.
Use warm, soapy water and a damp cloth to clean the appliance.
DO NOT use abrasive cleaners or pads.
Dry thoroughly after cleaning.
A CATERLITE dealer or qualified technician should carry out repairs if required.
Level Increments
500w to 1800w 500w, 800w, 1200w, 1500w, 1800w
500w to 1300w 500w, 800w, 1000w, 1200w, 1300w
60C to 240C 20C
0 to 180min 5min
Default
1200w
800w
240C
0min