Vitamix VM0214 Mode D'emploi page 7

Resetting the Pre-Set Buttons to the original
factory settings
1. Access the Owner Controls by activating the power switch located on
the back of the motor base while pressing button 2. Continue to press button 2.
2. Once the unit powers up, it will cycle through four screens then stop on the motor
status screen. Press button 2 again, within 12 seconds, to scroll through the menu
settings.
3. Scroll using button 2. The screen will display "1 TO OVERWRITE CURRENT PROGRAM".
Press button 1 to reset to the original factory settings.
Recipe Options
Arranged by recipe number (#) and drink type:
# DRINK TYPE
Starts at low speed for 6 seconds, ramps to medium speed for
1 Single Thin
9 seconds
Starts at low speed for 6 seconds, ramps to medium speed for
2 Double Thin
15 seconds
Starts at low speed for 5 seconds, quickly ramps to medium speed
3 Single Smoothie
for 2 seconds then to high speed for 19 seconds
Starts on low speed for 6 seconds then to high speed for 24
4 Double Smoothie
seconds
Ramps to high for 10 seconds then back down to low speed for
5 Hard Pack Shake
15 seconds
Starts at low speed for 4 seconds, gradually ramps to medium
6 Thick Hard to Blend speed for 6 seconds then medium high for 5 seconds, last 20
seconds on high
Starts at low speed for 4 seconds, gradually ramps to medium
7 Thick Hard to Blend Double speed for 6 seconds then medium high for 10 seconds, last 25
seconds on high
8 General Program 1
Starts at low speed for 8 seconds then to high speed for 24 seconds
Starts at medium speed for 11 seconds then to medium high speed
9 General Program 2
for 3 seconds
Starts at medium speed for 7 seconds then to high speed for
10 General Program 3
13 seconds
Slowly ramps to low speed for 10 seconds, immediately to medium
11 General Program 4
high for 20 seconds then immediately to high speed for 8 seconds
Starts at low speed for 4 seconds then to medium speed for
12 Frozen Coffee
14 seconds
Starts at low speed for 3 seconds then to medium high speed
13 Soft Serve Milkshake
for 9 seconds
Slowly ramps to a low speed for 7 seconds, medium high speed for
14 Ice and Puree
4 seconds then high speed for 7 seconds
Slowly ramps to low speed for 7 seconds, high speed for 53
15 Frozen Bowl 1
seconds
Slowly ramps to high speed for 13 seconds, immediately
16 Frozen Bowl 2 ramps to low speed for 8 seconds then immediately back
to high for 29 seconds
The following programs are designed to be used with the Vitamix Aerating Container (sold separately). Contact your local Vitamix Dealer/
Distributor to puchase the Aerating Container. Contact Vitamix Customer Service directly for availability and product information.
17 Cold Foam 1 Slowly ramps to low speed for 20 seconds
18 Cold Foam 2
Slowly ramps to low speed for 25 seconds
19 Cold Foam 3 Immediately ramps to high for 20 seconds
20 Cold Foam 4
Slowly ramps to high for 30 seconds
All manuals and user guides at all-guides.com
DESCRIPTION
Cover Door
1. Lift the handle to open the cover. Gently spread the sides of the door over the
round hinges and remove.
2. To reinstall the cover door, gently spread the sides of the door and place the
door hinge cutouts over the round hinges.
RUN
TIME
:15
:21
:26
:32
IMPORTANT NOTES!
Containers:
:25
• Touch & Go® Advance machines are optimized for use with the Vitamix®
32 oz. / 0,9 L Advance container (3 sided container). The 64 oz. / 2,0 L standard
container will not fit in the compact cover used on the Touch & Go® Advance.
:35
Contact Vitamix customer service at 800-886-5235 or contact your distributor for
more information.
• Outside the United States and Canada, your machine may come with a different
:45
container configuration.
Two-Piece Lid
:32
32 oz. / 0,9 L Advance Container
:14
The two-piece lid is easy to clean and easy to put on,
take off and seal.
:20 • To remove a fully latched lid, lift the two tabs and
pull upward and off.
• Twist the center lid plug to fasten or remove.
:38
• To secure lid plug, rotate it so one tab locks
between the notches on top of rubber lid.
:18
One-Piece Lid
:12
32 oz. / 0,9 L Advance Container
The one-piece lid is easy to clean and easy to put on,
:19
take off and seal.
• There is no lid plug for this lid.
:60
• Ingredients can be added through port on top.
:50
Blade Assembly
Blade Agitator Assembly: The blade assembly includes a precision-hardened
stainless steel blade with enclosed double sealed steel ball bearings for maximum
durability. The rugged blade assembly literally explodes molecules of food and ice
in the container, helping every batch to homogenize more effectively. The blades
:20
do not need to be removed for normal cleaning.
Drive Spline: Inserts into drive socket on the motor base to turn the blade.
:25
Note: Removing and replacing your container while the drive socket is still rotating
will strip the drive spline "teeth." (This part is NOT removable.)
:20
Retainer Nut: Must be tight.
:30
m a
a c h i n e S S e m b ly
FIGURE A
(Figure A)
(Figure B)
FIGURE A
FIGURE B
7