CLAS B.LINE OP 1522BL Mode D'emploi page 9

OP 1522BL
IMPORTANT
Upon receipt of the product, please read and follow all safety rules and instructions before
first use. Keep this manual.
SPECIFICATIONS
Rotation speed
Torque max
Consumption max
Air pressure
Air connection
Flexible
SAFETY RULES
1. Always wear safety glasses
2. Always make sure the trigger is not pulled before connecting it to the network.
3. Disconnect from the network before performing any work on the machine.
4. Always keep your tool clean and lubricated. Daily lubrication is essential to avoid internal
corrosion and possible failures.
5. Do not wear watches, bracelets or loose clothing when operating the machine.
6. Use lightweight hoses to connect the tool to the mains or compressor.
7. Do not overload the machine. Operate the tool at its optimal speed for maximum efficiency.
8. Do not increase the air pressure above the recommended level, excessive overload can
cause serious damage (physical and/or material).
9. For safety reasons and to avoid possible damage to the machine/operator, always make
sure that the machine has stopped before installing it after use.
1/2" D. IMPACT WRENCH 1600Nm DOUBLE HAMMER
Model
Drive
Weight
OP 1522BL
1/2" - 13mm
8500 tr/min
1600 Nm
169L/min
6.2 bar
1/4" (6.35mm)
3/8" (10mm)
2,1kg