Publicité
Les langues disponibles
Les langues disponibles
Programme knob and on/off indicator light
To switch on the appliance and select a washing programme:
• Turn the programme knob clockwise or counterclockwise. The programme marker on
the programme knob must agree with one of the washing programmes on the control
panel.
• The on/off indicator light comes on.
To switch off the appliance:
– Turn the programme knob clockwise or counterclockwise until the programme marker
agrees with the on/off indicator light.
– The on/off indicator light goes off.
Delay start button
Use this button to delay the start of the washing programme with an interval of 3 hours.
Refer to 'Select and start a washing programme'.
USE OF THE APPLIANCE
1. Be sure that the set level of the water softener agrees with the water hardness in
your area. If not, adjust the water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the appliance.
5. Set the correct washing programme for the type of load and soil.
6. Fill the detergent dispenser with the correct quantity of detergent.
7. Start the washing programme.
SETTING THE WATER SOFTENER
The water softener removes minerals and salts from the water supply. These minerals and
salts can cause damage to the appliance.
Adjust the level of the water softener if this does not agree with the water hardness in
your area.
Contact your local water authority to know the water hardness in your area.
German degrees
(°dH)
51 - 70
43 - 50
37 - 42
All manuals and user guides at all-guides.com
Water hardness
French degrees
mmol/l
(TH°)
91 - 125
9,1 - 12,5
76 - 90
7,6 - 9,0
65 - 75
6,5 - 7,5
Use of the appliance
Water hardness ad-
justment
Clarke de-
manually
grees
64 - 88
1)
2
53 - 63
1)
2
46 - 52
1)
2
31
elec-
troni-
cally
10
9
8
Publicité
