Kenmore 385.15358 Manuel D'instructions page 34

• Inserting bobbin
[] Place a bobbin in the bobbin case, making sure the
thread feeds clockwise from the bobbin.
[] Draw the thread through the slot of the case.
[] Continue to draw the thread under the tension spring _1_:"
and through the opening.
Pull out about 4" (10 cm) of thread.
t_l_' T ension spring
[] Holding the latch
shuttle, and then
the latch.
[]The case should lock into the place when the latch is
released.
[]
[]
[]
[]
J
J
J
J
22