Publicité
Changing Presser Foot
_l_Lever
(2_,Groove
, 3 Pin
• To remove
Turn the handwheel toward you to raise the needle to its
highest position. Raise the presser foot.
Press the lever _l_on the back of the foot holder. The
presser foot will drop off.
• To attach
Place the presser foot so that the pin _3_on the foot lines
up directly below the groove Y2_ofthe foot holder.
Lower the foot holder to lock the foot in place.
Presser
Foot Types
• Zigzag foot
Use this foot for both straight and zigzag stitching.
For: Straight stitch
(page 36)
Topstitching
(page 38)
Basic zigzag
(page 44)
Bar tacking
(page 48)
Button sewing
(page 48)
Overcasting stitch
(page 50)
Multiple zigzag stitch
(page 50)
Blind hem stitch
(page 52)
Lace work
(page 52)
Stretch stitch patterns
(page 54)
Knit stitch
(page 56)
Straight stretch stich
(page 56)
Box stitching
(page 58)
Twin needle stitches
(page
• Automatic
buttonhole
foot
The size of buttonhole is automatically
button in the automatic buttonhole foot.
For Buttonhole sewing
(p
• Zipper foot
The edge of
seam straight.
For:Zipper
• Hemmer foot
This special foot is
the foot helps to form a
For: Rolled hem sewing
The curl of
;tant width.
(page 40)
• Satin stitch foot
Use this foot for satin stitch and outlining applique.
For: Satin stitch
(page 44)
Monograming
(page 46)
Applique
(page 46)
Shell tuck
(page 54)
Smocking
(page 58)
Decorative satin stitch pattern
(page 60)
/
i3b
%
f
......................................................................................................................................................................................................................................................................
12
Publicité
