Sunny Health & Fitness SF-RW5515 Instructions D'assemblage page 14

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at
8669).
support@sunnyhealthfitness.com
31T
STEP 3:
Insert the Seat (No. 71) onto Sliding Rail (No.
62).
Insert the Limit Axle (No. 66) into the hole on
the back of the Sliding Rail (No. 62).
Attach the Limit Mat (No. 65) onto the Limit
Axle (No. 66) using 1 Screw (No. 63) and 1
Washer (No. 64), then tighten with Spanner
(No. 81).
STEP 4:
Attach Sliding Rail (No. 62) onto Rear Support
(No. 69) using 4 Screws (No. 72), 4 Spring
Washers (No. 52), and 4 Washers (No. 2).
Tighten and secure with Allen Wrench (No. 80).
STEP 5:
Attach the Sliding Rail (No. 62) to Main Frame
(No. 44) using 1 Bolt (No. 58) and 1 Screw (No.
59). Tighten and secure with Allen Wrench (No.
79) and Allen Wrench (No. 80).
Next, secure Sliding Rail (No. 62) to the Main
Frame (No. 44) using 1 Knob (No. 47) and 1
Washer (No. 46), then insert Pull Pin (No. 60).
13
or 1-877-90SUNNY (877-907-
31T