Beta Motorcycles EVO 4T EUROPA Mode D'emploi page 102

3
ADJUSTING FORK
ADJUSTING THE REBOUND
DAMPER
The hydraulic brake unit in extension
determines the behaviour in the extension
1
phase of the fork and can be adjusted us-
ing screw 1. Turning clockwise increases
the action of the brake in extension, while
rotating counter-clockwise decreases the
action of the brake in extension.
.
For standard calibration, refer to page 10
ADJUSTING THE SPRING
PRELOAD
Spring preload is adjusted by means of
screw 2. Turning clockwise will increase
the preload, while rotating counter- clock-
2
wise decreases the preload.
For standard calibration, refer to page 10.
SHOCK ABSORBER
ADJUSTING THE REBOUND
DAMPER
The hydraulic brake unit in extension deter-
mines the behaviour in the extension phase
of the shock absorber and can be adjusted
using screw 1. Turning clockwise increases
the action of the brake in extension, while
rotating counter-clockwise decreases the
action of the brake in extension.
For standard calibration, refer to page 10.
1
NOTE:
for adjustment use a T-handle wrenches
with jointed hexagonal socket.
GB
30