Télécharger Imprimer la page

LENCO L-71 Mode D'emploi page 3

Publicité

Les langues disponibles
  • FR

Les langues disponibles

PHONO ENCODING
1. Insert the USB flash disk or SD card into appropriate slot(18)/(19).
2. Slide the OFF/USB/PH selector(13) to "PH" function, "PHONO" is displayed on the LCD display
3. select and playback at phono for the track which will be assigned to the encoded sounds on the USB flash disk
or SD card.
4. Press once the "REC" button(10), the LCD display shows "USB" flashing/ "CARD" flashing. The encoding will starting
after 10 seconds and shows "PHONO" with flashing words "USB" / "CARD" lower left corner of the LCD display.
NOTED: Press twice the "REC" button(10) directly, the encoding will starting immediately.
5. To stop encoding, press "STOP/SD" button(15).
Re-mark: Do not interrupt during the phono recording process until completed. Otherwise,recording function
cannot be performed.
PLAYBACK OF MP3/WMA SONGS VIA USB FLASH DISK OR SD CARD STORAGE MEDIA
1. Insert the USB flash disk or SD card into appropriate slot(18)/(19).
2. Slide the OFF/USB/PH selector(13) to "USB" function, the unit will automatically read the total folders and the number
of the total tracks.
3. Playback will start by pressing "PLAY/PAUSE" button(16). playback starts with the first track, the LCD display shows
the current track number and the song "WMA" or "MP3" format .
4. To interrupt playback, press "PLAY/PAUSE" button(16). the time elapsed indicator will flash.
5. To resume playback, press the "PLAY/PAUSE" button(16) again.
6. To stop playback, press stop by using the "STOP/SD" button(15).
TRACK SKIP
"SKIP - DN" button(14) - press once to return to the beginning of the current track. press again quickly to back up
another track.
"SKIP - UP" button(12) - press once to skip to the next track. press again to move forward another track.
"F - UP" button(9)
- allow you to switch between the folder while the playback, hold either "SKIP - DN"(14) or
"SKIP - UP"(12) button to audibly search the current track in the desired direction.
ID3 Tag Support
- allowing you to conveniently view the artist name and the title of the track currently being played.
To enable ID3 functions by press the "ID3/PROG" button(8) during the playback mode,
the "ID3 ON" is displayed on the LCD display.
To cancel ID3 functions by press the "ID3/PROG" button(8) again.
REPEAT/INTRO/RANDOM MODE
(1) REPEAT 1
(2) REPEAT ALL TRACKS
(6) OFF MODE
(5) RANDOM
PLAY MODE
REPEAT SINGLE TRACK
REPEAT ALL TRACKS
RELEAT SINGLE FOLDER
INTRO PLAY MODE
RANDON MODE
OFF MODE
REPEAT PLAY
1. When the playback, if you desire to repeat the same track only, press the "MODE" button(11) on the unit .
2. To repeat all disc, press the "MODE" button(11) twice and the "ALL" display will light up.
3. To repeat folder, press the "MODE" button(11) thrice and the "
4. To cancel repeat play, press the "STOP/SD" button(15) or press the "MODE" button(11) repeatedly until the repeat
indicator disappears.
INTRO PLAY
Introduce all songs by playing 10 seconds of each track.
1. Either in stop or playback mode, press the "MODE" button(11) four times, the "INTRO" indicator will light up..
2. To cancel intro play, press the "STOP/SD" button(15) or press the "MODE" button(11) repeatedly until the intro indicator
disappears.
RANDOM PLAY
1. Either in stop or playback mode press the "MODE" button(11) five times, the "RANDOM" indicator will light up.
2. In the stop mode, press the "PLAY/PAUSE" button(16) to start playing. the tracks will be played randomly.
3. To cancel random play, press the "STOP/SD" button(15) once again until the "RANDOM" indicator disappears.
(3) REPEAT 1 FOLDER
(4) INTRO PLAY
INDICATOR ON LCD DISPLAY
ALL
INTRO
RANDOM
-------------------
E - 2
"display will light up.

Publicité

loading