Garland BULK 516 E Manuel D'instructions page 45

9. TROUBLE SHOOTING
Depending on the symptons that you may observe, you will be able to know the probable cause of the problem
and how to solve the problem.
Problem
The engine stops when started
The chain does not move
Poor cutting performance
Chain heats up
Cause
Not connected to the mains
Chain brake activated
Cable damaged
Switch damaged
Brushes worn out
Chain brake activated
Chain not sharp enough
Chain tension
Bad chain lubrication
45/148
Action
Connect to the mains.
Check chain brake and remove if
necessary.
Send machine to after sales service. Do
not repair cable with insulating tape.
Send machine to after sales service.
Send machine to after sales service.
Check chain brake and remove if
necessary.
Sharpen chain.
Tense the chain.
Check oil level and refill if necessary.
English