Husqvarna L321AHE Manuel D'utilisation page 13

3 Close the back shield to allow the machine to
discharge material to the left of the machine while
cutting.
Cutting height
The cutting height can be adjusted to 9 (1-9) different
positions.
Raise wheels for low cut and lower wheels for high cut.
Adjust cutting height to suit your requirements. Medium
position is best for most lawns.
• To change cutting height, squeeze height adjuster
lever toward the wheel. Move the wheel up or down to
suit your requirements. Set the same height at all four
corners.
• The adjuster lever is spring loaded.
Filling with oil
• The oil tank is empty at delivery. Fill the oil slowly with
the included oil. See instructions under the heading
Maintenance.
ASSEMBLING AND ADJUSTMENTS
English – 13