Electromagnetic Compatibility; Declaration Of Conformity - dbx AFS 224 Mode D'emploi

IMPORTANT SAFETY INSTRUCTIONS
ELECTROMAGNETIC
COMPATIBILITY
This unit conforms to the Product
Specifications noted on the Declaration
of Conformity. Operation is subject to
the following two conditions:
• this device may not cause harmful
interference, and
• this device
interference
interference
undesired operation.
Operation of this unit within significant
electromagnetic fields should be avoided.
• use only shielded interconnecting
cables.
must accept any
received, including
that may cause
U.K. MAINS PLUG WARNING
A molded mains plug that has been cut off from the cord is unsafe.
Discard the mains plug at a suitable disposal facility. NEVER UNDER
ANY CIRCUMSTANCES SHOULD YOU INSERT A DAMAGED OR CUT
MAINS PLUG INTO A 13 AMP POWER SOCKET. Do not use the
mains plug without the fuse cover in place. Replacement fuse covers
can be obtained from your local retailer. Replacement fuses are 13
amps and MUST be ASTA approved
DECLARATION OF
CONFORMITY
Manufacturer's Name:
Manufacturer's Address:
declares that the product:
Product name:
Note:
Product option:
conforms to the following Product Specifications:
Safety:
EMC:
Supplementary Information:
The product herewith complies with the requirements of the Low
Voltage Directive 72/23/EEC and the EMC Directive 89/336/EEC as
amended by Directive 93/68/EEC.
European Contact: Your local dbx Sales and Service Office or
to BS1362.
dbx Professional Products
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
dbx AFS 224
Product name may be suffixed by the
letters-EU.
None
IEC 60065 (1998)
EN 55013 (1990)
EN 55020 (1991)
Vice-President of Engineering
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Date: June 9, 2003
Harman Music Group
8760 South Sandy Parkway
Sandy, Utah
84070 USA
Ph: (801) 566-8800
Fax: (801) 568-7583