Temperature selection button
3
The required temperature is set
with this button.
Temperature display
4
Indicates the set temperature of
the freezer compartment.
Alarm button
5
Used to switch off the warning
signal, see chapter "Alarm
function".
Switching
the appliance on
Fig. "
Switch on the appliance with
the On/Off button 1.
A warning signal sounds.
The temperature display 4 flashes
and the alarm button 5 is lit.
Press the alarm button 5. The warning
signal switches off.
When the freezer compartment has
reached the set temperature, the
temperature display 4 is lit.
Operating tips
After the appliance has been switched
■
on, it may take several hours until
the set temperature has been
reached. Do not put any food
in the appliance beforehand.
The fully automatic NoFrost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
Setting
the temperature
Fig. "
Freezer
The temperature can be set
from -16 °C to -26 °C.
Keep pressing temperature setting
button 3 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 4.
Alarm functions
Fig. "
Door alarm
A warning signal is switched on if the
appliance door is left open for a while.
Close the door to switch off the warning
signal.
en
29