Télécharger Imprimer la page

Hilti SL 2-22 Mode D'emploi page 15

Masquer les pouces Voir aussi pour SL 2-22:

Publicité

Les langues disponibles

Les langues disponibles

▶ Prior to each use and before and after prolonged transport, check the
product and the batteries for damage.
Storage
WARNING
Accidental damage caused by defective or leaking batteries !
▶ Always store your products with the batteries removed!
▶ Store the product and the batteries in a cool and dry place. Comply with
the temperature limits stated in the technical data.
▶ Do not store batteries on the charger. Always remove the battery from
the charger when the charging operation has completed.
▶ Never leave batteries in direct sunlight, on sources of heat, or behind
glass.
▶ Store the product and batteries where they cannot be accessed by
children or unauthorized persons.
▶ Prior to each use and before and after prolonged storage, check the
product and the batteries for damage.
8
Troubleshooting
If a problem occurs, always observe the charge-status and fault indicator of
the battery. See the section headed Status indicators of the Li­ion battery.
If the trouble you are experiencing is not listed in this table or you are unable
to rectify the problem by yourself, contact Hilti Service.
Trouble or fault
The battery doesn't
engage with an audi-
ble click.
LEDs of the battery
show nothing
9
Manufacturer's warranty
▶ Please contact your local Hilti representative if you have questions about
the warranty conditions.
*2265887*
Possible cause
The retaining lugs on the
battery are dirty.
Battery defective
2265887
Action to be taken
▶ Clean the retaining
lugs and push the
battery in until it
engages.
▶ Contact Hilti Service.
English
11

Publicité

loading