Publicité
Les langues disponibles
Les langues disponibles
OPERATING THE SWASH
Using the IS707
Warm Air Dryer Function
Press the "Dry" button to activate the warm air
dryer. The dryer will run for two minutes and
turn off automatically.
1. While the air dryer is operating, users
can adjust the dryer temperature to a
comfortable
+"
level using the Dry "
dry temperature will be reflected on the five
indicator LEDs.
2. If you would like to stop the dryer before the
two minutes has elapsed, press Stop.
Auto Mode
Pressing the "Auto Mode" button will initiate
a one-minute Rear Wash with the following
parameters preset:
• Seat Temperature set to Medium
• Nozzle Oscillation (Move) on
• Water Pressure set to Level 3
• Water Temperature set to Medium
After the wash cycle is over, Auto Mode
will initiate a one-minute Warm Air Dry cycle
on Level 2.
NOTE: All wash and dry settings are adjustable,
while the Auto Mode wash cycle is running, to
suit your preferences
–"
and "
buttons. The
Eco Mode
In this mode the water in the tank and the seat
temperature will be heated to 86°F when the
bidet is not in use. Once a person sits on the
bidet the Swash will revert to the last seat and
water temperature settings used. To select
this option press and release the "Eco Mode"
button to illuminate its indicator.
17
Publicité
