Publicité
Les langues disponibles
Les langues disponibles
OPERATING THE SWASH
IS707 Control Panel
1. Stop Button
Stops all wash and dry functions currently
operating. Press and hold this button for four
seconds to power off the bidet.
2. Rear Wash / Move Button
Press once to initiate a rear wash. Press
again to initiate nozzle oscillation (repetitive
forward and backward nozzle movement).
3. Front Wash / Move Button
Press once to initiate a front wash. Press
again to initiate nozzle oscillation (repetitive
forward and backward nozzle movement).
4. Dry Button
Press once to initiate a two minute Warm Air
Dryer cycle.
5. Massage Button
Pressing this button while a wash is running
enables the water to repeatedly increase
and decrease in pressure in a pulsating
pattern. Press again to stop the massage.
6. Water Pressure and Dry Temperature
Buttons and Indicators
Press the "+" and "–" buttons to increase
and decrease the outgoing water pressure
to one of five settings. Pressing these
buttons while the Warm Air Dryer is
operating will adjust the Drying temperature.
Settings will be saved for the next use.
7. Nozzle Position Buttons
Press the arrow up and arrow down buttons
to adjust the nozzle position forward and
backward during a wash cycle. Between
uses the nozzles will revert back to the
middle position.
8. Water Temperature Button and Indicators
Press and release the "Water Temp" button
to adjust the outgoing water temperature
to one of four settings (LO: 93.2° F, MED:
98.6° F, HI: 104° F, and OFF). Settings will be
saved for the next use.
9. Seat Temperature Button and Indicators
Press and release the "Seat Temp" button
to adjust the seat temperature to one of
four settings (LO: 95° F, MED: 100.4° F,
HI: 104° F, and OFF). Settings will be
saved for the next use.
10. Power Indicator
This indicator will light up when the bidet
is powered on, and will be off when the
bidet is powered off. To turn off the bidet
press and hold the "STOP" button for at
least four seconds.
11. Eco Mode Button and Indicator
Press and release the "Eco Mode"
button to select or turn off Eco Mode.
The indicator will light up when the Eco
Mode has been selected. See Page 17
for more information.
12. Night Light Button and Indicator
Press the "Night Light" button to enable
the Night Light (the indicator light will be
illuminated). Press again to disable the
Night Light and indicator.
13. Auto Mode Button
Press this button once to initiate a one
minute rear wash cycle followed by a
one minute dry cycle. See Page 17 for
more information.
15
Publicité
