Publicité
Les langues disponibles
Les langues disponibles
Grill heating element
This model has been fitted with a hinged grill ele-
ment to make the roof of the oven especially easy
to clean.
Before proceeding ensure the oven
is cool and disconnected from the
electricity supply.
1) Undo the screw fastening the grill element (see
Fig). When carrying out this operation for the
first time, we recommend using a screwdriver.
2) Then gently pull the grill downwards to allow
access to the oven roof (see Fig).
3) Clean the oven roof with a suitable cleaner
and wipe dry before returning the hinged grill
element to its original position.
4) Carefully push the grill element up into its origi-
nal position and re-tighten the retaining nut.
Ensure the retaining nut on the grill
element is properly tightened so that
it does not fall down when in use.
Oven Shelves and Shelf Supports
To clean the oven shelves, soak in warm soapy water
and remove stubborn marks with a well wetted soap
impregnated pad.
Rinse well and dry with a soft cloth.
The shelf supports can be removed for easy cleaning.
Proceed as follows:
1. remove the front screw while keeping the shelf
support in position with the other hand;
2. disengage the rear hook and take off the shelf
support;
3. once the cleaning is carried out, refit the shelf
supports following the procedure in reverse.
Please, ensure the retaining nuts are secure when
refitting the shelf support.
electrolux 17
17
Publicité
