Publicité
Preventing material damage
NOTICE:
The high weight of the appliance or, if not rolled in a straight line, the appliance's castors
may damage the floor when the appliance is moved.
Transport the appliance using a hand-cart.
▶
Use floor protection when moving the appliance, and do not move it in a zigzag fashion.
▶
Condensation may form on the casing due to a lack of air circulation.
Never remove the spacers from the rear of the appliance.
▶
Never remove the spacers from the sides of the appliance unless this is described in the
▶
installation instructions.
When the appliance door is closed, the mullion rail should be closed (flush with the door
edge) or damage may occur.
Never open the mullion rail manually.
▶
If the mullion rail has been opened, rotate it closed (flush with the door edge) before clos-
▶
ing the appliance door.
Using the base, runners or appliance doors as a seat or climbing surface may damage the
appliance.
Do not stand or lean on the base, runners or doors.
▶
If the water pressure is too high or too low, this may impair functioning of the appliance.
Make sure that the water pressure in the water supply system is at least 29 psi (200 kPa)
▶
and max. 116 psi (800 kPa).
If the water pressure exceeds the maximum value specified, a pressure-reducing valve
▶
must be installed between the drinking water connection and the hose set of the appli-
ance.
Modified or damaged water hoses may result in material damage and damage to the appli-
ance.
Never kink, crush, modify or cut through water hoses.
▶
Never re-use water hoses that have been used before.
▶
If you clean fittings and accessories in the dishwasher, this may cause them to become de-
formed or discolor.
Never clean fittings and accessories in the dishwasher.
▶
5
Publicité
