Télécharger Imprimer la page

Sharp PQ321 Serie Mode D'emploi page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
• This product is for use indoors.
• A mounting bracket compliant with VESA specifications is
required.
• To install on a stand (commercially available) or on a wall, or to
remove or move the monitor, consult your dealer.
• Mounting the monitor on the wall requires special expertise
and the work must be performed by an authorized ASUS dealer.
You should never attempt to perform any of this work yourself.
Our company will bear no responsibility for accidents or injuries
caused by improper mounting or mishandling.
• Use the monitor with the surface perpendicular to a level
surface. If necessary, the monitor may be tilted up to 25
degrees upward or 5 degrees downward.
• This monitor should be used at an ambient temperature
between 32°F (0°C) and 104°F (40°C). Provide enough space
around the monitor to prevent heat from accumulating inside.
For the monitor in landscape orientation
2
[5]
For the monitor in portrait orientation
7-7/8 [20]
2
[5]
2 [5]
* When you install this monitor on a wall, the monitor emits
heat during operation, please be aware that this heat may
discolor or alter the wall.
• If it is difficult to provide sufficient space for any reason such
as the installation of the monitor inside a housing, or if the
ambient temperature may be outside of the range of 32°F (0°C)
to 104°F (40°C), install a fan or take other measures to keep the
ambient temperature within the required range.
• Do not block any ventilation openings. If the temperature
inside the monitor rises, this could lead to a malfunction.
If any component should be missing, please contact your dealer.
* Liquid Crystal Display Monitor: 1 * Power cord: 1 * AC adapter: 1
* Setup Manual (this manual): 1 * DisplayPort cable: 1 * RS-232C conversion cable (Φ3.5 mini-jack): 1
* Pedestal (for stand): 1 * Strut (for stand): 1 * Attachment plate (for stand): 1 (preinstalled on monitor)
* Countersunk screws (M4 x 6 without washers): 5 * Screws (M4 x 10 with washers): 4 * Hex wrench: 1
* Cable clamp: 2 * Cable clamp (small): 1 * Cable clamp (large): 2 * Horizontal Sticker (operation buttons): 1

E
MOUNTING PRECAUTIONS
Unit: inch [cm]
7-7/8 [20]
*
2
[5]
2 [5]
Unit: inch [cm]
*
2
[5]
Supplied Components
• Do not place the monitor on a device which generates heat.
• When installing the monitor in landscape orientation, you
can attach the supplied
horizontal sticker
(Operation buttons) to the
right side.
Horizontal sticker
(Operation
buttons)

Publicité

loading

Ce manuel est également adapté pour:

Pq321qe