Publicité
Les langues disponibles
Les langues disponibles
Daily use
Your refrigerator compartment is equipped with shelves, door racks and drawers with various
logos to help you store your food in the right place.
Using the shelves
The walls of the refrigerator are equipped with a series of runners so that the shelves
can be positioned as desired.
Positioning the small door trays
The small door trays can be removed to assist cleaning. To do this, progressively pull
the door rack in the direction indicated by the arrows until you can remove it
completely. After cleaning it, replace it in the desired location.
Adjustable door rack
Six different height adjustments are available to provide storage areas that you
need thanks to the adjustable door rack.
To change the position of adjustable door rack:
• Hold the bottom of the door rack and pull the tabs on the side of the door
rack, in the direction of the arrow. (Fig.1)
• Position door rack the required height by moving it up and down. After you
get the position that you want for the door rack, release the tabs that are on
the side of the door rack (Fig.2) Before releasing the door rack, apply
pressure up and down to ensure that it is perfectly in place.
Note: Before moving door rack loaded, you must hold the rack by supporting the
bottom. Otherwise, door shelf could fall off the rails due to the weight, and so damage may occur on
the door rack or rails.
Turbo Fan
Do not block the air inlet and outlet openings when storing food, otherwise
air circulation provided by the turbo fan will be impaired.
Fresh Dial
If the crisper is full, the fresh dial located in front of the crisper should be
opened. This allows the air to go into the crisper and the humidity rate to be
controlled, in order to increase the life of food within.
The dial, located behind the shelf, must be opened if any condensation is
seen on the glass shelf.
Publicité
