URBANGLIDE ALL ROAD 5 Mode D'emploi page 10

First, turn on your product by pressing the "Power" button on the handlebars. Check that your battery is charged.
Place your foot on the tray of your scooter
and give an impulse with your other foot to
move forward.
To brake, gently press the brake handles on
your handlebars.
To enter the settings of your product, press the "on/off" and "horn" buttons for 5 seconds. To validate, keep the
horn pressed. Caution! If you change all the basic settings, you will change the performance and status of your
product. You are advised to change only the settings below :
Menu
P01
P02
P03
Use
System settings
Setup
Start mode
0 = Immediate start
Speed control
0 = Disable
Max speed setting
Eco = 6km/h STD : 15km/h
10
Gently squeeze the throttle trigger to begin
gaining speed.
When you have to turn, slow down to take
your turn safely.
1 = Pulse required
1 = Enable
Turbo : 25km/h